Just how do you actually feel on the subject of How to Troubleshoot and Repair an Electric Water Heater?
Many modern residences take advantage of an electric water heater for their heating system, as a result of its ease and also simplicity of use. Nevertheless, just like any other electric devices, troubles might occur with its usage, unexpectedly. It can be actually discouraging to get up to a cold shower as opposed to a warm one or having your bathroom with water that isn't hot sufficient and even too warm. Whatever the instance might be, water heater troubles can be rather nerve-racking. Fortunately, we've made a listing of feasible remedies to your hot water heater issues. There are a number of factors that might create most of these problems, it could be a problem with the power supply, the electrical burner, or the thermostat. Before doing anything, ensure you shut off the major power supply for security. Whatever the problem is, getting it dealt with need to not pose too much of a concern if you comply with these actions:
Call A Professional:
If after changing all defective parts and resetting your temperature, the hot water heater still isn't working, you might need to call an expert plumber for a professional point of view. The issue with your heating system could be that the hot and cold faucets have actually been changed or it may be undersized for the quantity of warm water needed in your house. Whatever the instance may be, a specialist plumber would certainly aid solve the trouble.
Inspect Your Power Supply:
As standard as this may seem, it is very needed. Without appropriate power, your hot water heater will certainly not function. So the first thing to do when your water all of a sudden retires is to verify that it isn't a power problem. Inspect if the fuse is burnt out or the breaker tripped. If the breaker is the problem, merely transform it off and on once again. Replace any damaged or worn-out fuse. Evaluate the device with power after these changes to see if it's now working.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't hot enough, you may need to inspect the temperature level setups on your upper thermostat. Make sure the breaker is switched off prior to doing anything. Open up the accessibility panel and press the red button for temperature reset above the thermostat. This ought to assist warm the water. Transform the breaker back on and also examine if the problem has been dealt with.
Inspect the Burner in the Hot Water Heater:
If it's not a power issue, after that attempt having a look at your heating element if it is still working. Evaluate each of your heating elements to make sure the issue isn't with any of them. If any of them is defective, change that component and after that inspect whether the warm water is back on.
Conclusion
Hot water heater troubles are not always major. A lot of them are because of small issues like a blown fuse or worn-out burner. Changing the damaged components ought to suffice. Nonetheless, if you are still unable to address the trouble, give a call to your nearest plumber ahead to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed reading our article about How to Troubleshoot and Repair an Electric Water Heater. Thank you so much for taking a few minutes to read through our post. For those who enjoyed reading our post please don't forget to share it. Bless you for your time. Please check up our website back soon.
For best results, ring!